Freescale Semiconductor PE Micro Cyclone Pro User Manual page 69

Figure 8-5: True-Time Simulator & Real-Time Debugger Window
Cyclone PRO User Manual
5. If you created a new product using the Codewarrior project wizard,
and selected a P&E Debug Interface for your project target, then at
this point you should see the P&E Communication Assistant.
Alternately, you can select your connection type (target) manually
through the HiWave software. In the Component... menu, select the
"set connection" menu option. This will allow you to choose from the
various connection types available in your version of Codewarrior.
In-Depth detail about selecting and configuring any of the P&E
connections can be found later in the manual. For more information
using a Cyclone Pro in Codewarrior with an HC08 device, please see
Section 8.3 - HC08 P&E Multilink/Cyclone PRO Connections. For
more information using a Cyclone Pro in Codewarrior with an HCS08
CYCLONE PRO
63