Freescale Semiconductor PE Micro Cyclone Pro User Manual page 13

Step 4.
The SAP image stored on your Cyclone PRO can now be executed with one
button press. Once your target is connected to the Cyclone PRO, press the
"START" button of the Cyclone PRO unit and wait for programming operations
to finish. During this process, the LCD screen and LEDs will show the status
of operations. Eventually the "Success" or "Error" LED will illuminate, and the
LCD will display the results.
Cyclone PRO User Manual
b. In the Cyclone Image Creation Utility, select your architecture from
the "Specify Target Architecture" drop-down list
c. Click the "Launch Script Wizard" button. Follow the pop-up screens to
specify a programming algorithm and target object file. The program-
ming algorithm, target object file, and default programming sequence
will then show up in the programming sequence listbox.
d. Specify the auxiliary setup and hardware setup, such as Unsecure
Target, Target Voltage and Power Settings.
e. Type an Image Description for your SAP image. A time stamp will
automatically be inserted for you.
f. Click the "Save Image to Cyclone" button.
g. Choose the communications interface, select the Cyclone PRO to
which the image will be saved, and then click the "Store Image to
Cyclone" button. A backend image configuration utility will pop up and
store the image information on the Cyclone PRO. Your SAP image
has now been created.
Execute SAP Image
CYCLONE PRO
7