Tesla RoboStar iQ600 Manual page 80

Robotic vacuum cleaner
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 72
The robotic vacuum cleaner is offline (not connected to
the WiFi router).
Vacuuming is very loud.
A screech sounds while vacuuming.
The robotic vacuum cleaner moves slowly.
Poor cleaning quality.
The robotic vacuum cleaner is offline (not connected to
the WiFi router).
Is it necessary to disconnect the charging station when
the robotic vacuum battery is fully charged?
Is the laser safe in the TESLA robotic vacuum cleaner?
the blue LED light starts flashing slowly - the robotic vacuum cleaner is ready for
pairing with your mobile phone. Start the TESLA application on your smartphone
and follow the instructions.
Make sure your WiFi network is set up and fully functional. The robotic vacuum
cleaner should always be within easy reach of a high-quality and strong WiFi
signal from your WiFi router.
Clean the main center brush, side brushes, wheels, front wheel, bottom of the
robotic vacuum cleaner and front bumper.
Remove the front wheel and clean the centerline from hair and dust. If
necessary, you can lubricate the wheel axis.
Clean the ultrasonic sensor. Make sure the sensor front grill is clean and free of
blocking obstacles.
Empty the dust tank. Clean or replace the HEPA filter and clean the center
cleaning brush.
1. If the robotic vacuum cleaner battery is low, cleaning will not start. Please
charge the battery to full capacity please.
2. Scheduled cleaning will not be properly synchronized between the robotic
vacuum cleaner and your mobile phone if the robotic vacuum cleaner is
disconnected from the WiFi network. Therefore, keep the robotic vacuum cleaner
always within easy reach of a high-quality and strong WiFi signal from your WiFi
router.
In standby mode, the robotic vacuum cleaner has very low power consumption,
so we do not recommend turning off the power supply. If you do not use the
robotic vacuum cleaner for an extended period of time, turn it off and disconnect
the charging station from the power supply. However, you should fully charge
the vacuum cleaner every three months to prevent the battery from being
completely discharged.
The TESLA robotic vacuum cleaner uses an advanced and safe laser laser
scanner.
This laser belongs into Laser Safety Class I, which provides safety for humans
and animals.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents