Tesla RoboStar iQ600 Manual page 74

5. Place the robotic vacuum cleaner on the charging station to lightly touch the charging contacts.
6. The robotic vacuum cleaner battery will start charging automatically. We recommend charging the battery fully before first cleaning.
Warning:
Make sure the charging station is within range of a high quality and strong WiFi signal from your WiFi router so that it can connect to a WiFi
network while charging. The robotic vacuum cleaner also needs this WiFi connection during its charging to be properly oriented and available to
start cleaning.
7. How to operate and all advanced features of the robotic vacuum cleaner are described in the application (Settings > Help). Install an
application on your smartphone for connection between your smartphone and robotic vacuum cleaner.
Android: search for "TESLA RoboStar iQ500/iQ600" in Google Play
Apple: search for "TESLA RoboStar iQ500/iQ600" in Apple Store
8. For WiFi connection, enable WiFi, Bluetooth and GPS in your smartphone for the first pairing.
9. Make sure the WiFi signal coverage for your smartphone and robotic vacuum cleaner is good and strong enough. If possible, perform the
first setup of the robotic vacuum cleaner near your WiFi router.
White color: battery charge level is higher than 20%
Red color: battery charge level is less than 20%
Slow blinking: battery is charging
Red colour, blinking: error
LED indicator (A)