Transmitter Settings - DEGA UDA III User Manual

6.11.9 Transmitter settings

The dialog is used to set the transmitters connected to the control panel. The first part of the dialog is a screen with a list of
configured transmitters.
Figure 49 Settings - selection of transmitters
Selecting a transmitter displays the settings dialog for that transmitter. The user has the option to change the transmitter
settings by touching the appropriate editbox.
The configuration parameters are stored in the control panel's memory independently of the internal configuration of the
transmitter. Each time the control panel initiates communication with the transmitter, it reads its configuration and checks
whether it matches the configuration stored in the control panel. In case of differences, reconfigure the transmitter.
Therefore, for example, if a transmitter is replaced with another one due to a fault, the control panel will ensure the correct
configuration of the new transmitter.
Figure 50 Transmitter channel setting
57