Rs485_Host Settings - DEGA UDA III User Manual

6.11.14 RS485_HOST settings

RS485_HOST is a universal RS485 interface that can be used to connect the control panel to a DEGA Visio system or service
using DegaConfig (DEGA slave protocol). Or the Modbus protocol can be used to connect to a remote PLC.
Dialog item
DEGA slave
Modbus RTU slave
Table 27 RS485_HOST settings dialog
Figure 54 RS485_HOST settings
Description
Activate the DEGA slave protocol on the RS485_HOST interface
Activate the Modbus protocol on the RS485_HOST interface
63
User Service
 
 