Channel Status - DEGA UDA III User Manual

6.6.1

Channel status

The status of the channel is indicated by the color background of the channel graphics and the graphic appearance of the
channel element. The following table describes the individual states and how they are indicated. This is an overview
information, details can be obtained by clicking on the channel and displaying the channel details screen.
State Graphic
Design
Ok
Initialization
Glow
Disorder
Alarm 1
Alarm 2
Alarm 3
Alarm 4
PEL/STEL
alarm
Calibration
Inactive
Table 9 Possible channel states
Indication Description
White Functional channel.
background and
green check
Gray background Initialization of communication with the transmitter. The control panel
and inscription tries to establish communication and configure the transmitter. In case
'initialization' of failure, the channel status changes to Fault.
Inscription The transmitter sensor glows when the power is turned on. The
'heating' instead transmitter waits for the values from the transmitter to stabilize. After
of value stabilization, it switches itself to the measurement mode.
Yellow Channel error. The basic error status is displayed in the channel
background description. The detailed information about the error can be obtained
in the channel details screen and in the control panel log.
Value indicator Alarm 1 is indicated by the color of the value indicator and the A1
mark.
Value indicator Alarm 2 is indicated by the color of the value indicator and the A2
mark.
Value indicator Alarm 3 is indicated by the color of the value indicator and the A3
mark.
Value indicator Alarm 4 is displayed by the color of the value indicator, the A4 mark
and red and the change of the color background of the channel to red.
background
Condition - blue The PEL/STEL channel alarm is indicated by a flashing blue triangle in
triangle the lower right corner. The detailed information about active alarms
can be obtained in the channel details screen.
Condition - Passed transmitter calibration.
calibration mark
Gray background Blocked channel. For service and maintenance purposes, the channels
and inscription can be blocked in the control panel settings. Attention, resetting the
'inactive' control panel will unblock all channels.
40