Expansion Cards; Connectable Peripherals - DEGA UDA III User Manual

5 Expansion cards

Connectable peripherals

It is possible to connect expansion peripherals to the control panel to increase the possibilities of the control panel. They
include:
DEGA UDA III AI8 - expansion board for 8 transmitters with 4-20 mA current loop with HART support
DEGA UDA III RE16 - expansion board with 16 relays.
These peripherals can be connected to the internal DIN rail in the control panel box in a maximum number of 2 pieces, or they
can be installed in an external box. The length of the cabling should not exceed 10 m.
Connection to the control panel using a non-crossed UTP cable cat5e to the CAN connector.
The end elements of the network must be terminated with a termination jumper.
Control panel
Figure 16 CAN termination jumper - expansion cards
on the control panel are located near the CAN
connector
Figure 17 CAN termination jumper on the expansion cards is located
between the CAN connectors
24
Expansion cards