Fictitious Concentration Test - DEGA UDA III User Manual

6.11.19 Fictitious concentration test

The fictitious concentration test is used to test the control panel settings and verify the correct response to alarms from
transmitters. When setting a fictitious concentration, the control panel behaves as if the given transmitter was measured by
the transmitter itself. The response to the alarm corresponds to the channel configuration, the alarm is stored in the logs, etc.
The forced concentration remains applied even after leaving the dialog, the user can check the status of the control panel in
the other screens.
Dialog item
Channel icon
Fictitious concentration - slider
Fictitious concentration - editbox
Reset button
Table 33 Dialogue test of fictitious concentration
Tip: After the set time has elapsed, the normal function of the channel will be restored automatically.
Figure 59 Fictitious concentration test
Description
Touching the icon selects a channel in the list for which a fictitious concentration
can be 'forced'. Channels with a forced concentration contain a lock icon.
Slider for quick adjustment of the fictitious concentration of the marked channel.
Editbox allows you to enter the exact value of the fictitious concentration of the
selected channel.
Restores normal channel operation.
69