Temperature Sensor - DEGA UDA III User Manual

6.11.2 Temperature sensor

The dialog is used to configure the external control panel temperature sensor. The value of the sensor channel is the
measured temperature [°C]. Furthermore, the control panel diagnoses the functionality of the sensor and activates the signal
of the ERROR channel in the event of a sensor failure.
Dialog item
Description
Alarm1
Alarm2
Alarm3
Alarm4
Show channel
Outputs
Table 19 Temperature sensor dialog
The channel signals for the output response matrix are as follows:
Signal name Description
Alarm1 Channel value equal to or higher than the set value 'Alarm1'
Alarm2 Channel value equal to or higher than the set value 'Alarm2'
Alarm3 Channel value equal to or higher than the set value 'Alarm3'
Alarm4 Channel value equal to or higher than the set value 'Alarm4'
PEL alarm Does not support
STEL alarm Does not support
Error Transmitter failure. The signal is active in the event of a communication error with the transmitter
Table 20 'Temperature sensor' channel signals
Figure 42 Temperature sensor
Description
Used for user channel description (channel name)
Alarm value 1
Alarm value 2
Alarm value 3
Alarm value 4
Enables channel display on the 'Transmitters' tab
Opens the output response matrix dialog to channel signals
52
User Service
 
 
 
 
 
 
 