Faq; How To Add A New Transmitter - DEGA UDA III User Manual

FAQ

6.12.1 How to add a new transmitter

1 Settings → Transmitter settings → 'Add transmitter' button
2 Enter the channel number for which the transmitter is added.
It is recommended to use the channel number corresponding
to the transmitter address (channel = address).
3 Enter an address (if it does not match the channel number)
4 Press the Load button
- The parameters are read from the connected
transmitter
5 Optionally set channel:
- enter a caption
- change transmitter settings
- set the output matrix
Press the Back button
Table 34 How to add a new transmitter
71