Table of Contents
Advertisement
Control panel architecture
6.5.1
Control panel channel
The control panel channel represents one transmitter connection to the control panel. The control panel channel contains the
transmitter settings and processes the measured data by the transmitter. The output of the channel is status information and
signals, which are further processed by the control panel. Each channel can generate up to 7 digital signals, which are fed to
the digital outputs via a user-configurable matrix. The user has the option to set the output activation to any signal from the
channel using the output configuration matrix. Each channel has its own output configuration matrix.
Figure 25 Channel signals
Channel signals are evaluated based on the measured value (ALARM type) and the channel status (ERROR type). The signal
states are then used to activate the outputs according to the output matrix settings. Each signal can activate any combination
of outputs, and similarly one output can be activated by any number of signals.
36
Advertisement
Table of Contents
