Table of Contents
Advertisement
Insert the wiper insert starting from the claw at the center of the
4
wiper blade. Pass the wiper insert through the 3 claws so that it
sticks out from the stopper, and then pass the wiper insert through
the final remaining claw.
Applying a small amount of washer fluid to the wiper insert can make it
easier to insert the claws into the grooves.
Check that the wiper blade
5
claws are fitted in the grooves
of the wiper insert.
• If the wiper blade claws are not
fitted in the grooves of the wiper
insert, grasp the wiper insert
and slide it back and forth multi-
ple times to insert the claws into
the grooves.
• Lightly lift up the center of the wiper insert to make the insert easier to
slide.
When installing a wiper blade, reverse the procedure in step
6
After installing the wiper blade, check that the connection is locked.
■
Wiper blade and wiper insert handling
Improper handling may result in damage to the wiper blades or wiper insert. If
you have any concerns about replacing the wiper blades or wiper insert your-
self, contact your Toyota dealer.
6-3. Do-it-yourself maintenance
415
6
.
1
Advertisement
Table of Contents
