Toyota PRIUS 50 2020 Series Owner's Manual page 254

252
4-5. Using the driving support systems
Changing settings of the pre-collision system
■ Enabling/disabling the pre-collision system
The pre-collision system can be enabled/disabled on
of the multi-information display.
The system is automatically enabled each time the power switch is
turned to ON mode.
If the system is disabled, the
PCS warning light will turn on
and a message will be dis-
played on the multi-information
display.
■
Changing the pre-collision warning timing
The pre-collision warning timing can be changed on
of the multi-information display.
The warning timing setting is retained when the power switch is turned
off.
However, if the pre-collision system is disabled and re-enabled, the
operation timing will return to the default setting (middle).
Early
1
Middle
2
This is the default setting.
Late
3
(P. 126)
(P. 126)