Dynamic Radar Cruise Control with Road Sign Assist
When this function is enabled and the system is operating in vehicle-
to-vehicle distance control mode (P. 281), when a speed limit sign is
detected, the recognized speed limit will be displayed with an up/
down arrow. The set speed can be increased/reduced to the recog-
nized speed limit by pushing the lever up or down.
● When the current set speed is
lower
than
the
speed limit
Push the lever up.
● When the current set speed is
higher than the recognized
speed limit
Push the lever down.
Enabling/Disabling the Dynamic Radar Cruise Control with Road
Sign Assist
Dynamic Radar Cruise Control with Road Sign Assist can be enabled/
disabled in
on the multi-information display. (P. 102)
When the Dynamic Radar Cruise Control with Road Sign Assist is
operating, while driving down a hill, the vehicle speed may exceed the
set speed.
In this case, the displayed set vehicle speed will be highlighted and a
buzzer will sound to alert the driver.
4-5. Using the driving support systems
recognized
289
4