Table of Contents
Advertisement
370
6-1. Maintenance and care
NOTICE
■
When using an automatic car wash (vehicles with rain-sensing wind-
shield wipers)
Set the wiper switch to the off position.
If the wiper switch is in the
wiper blades may be damaged.
■
When using a high pressure car wash
●
When washing the vehicle, do not let water of the high pressure washer hit
directly or the vicinity of the camera (if equipped). Due to the shock from
the high pressure water, it is possible the device may not operate as nor-
mal.
●
Do not bring the nozzle tip close to boots (rubber or resin manufactured
cover), connectors or the following parts. The parts may be damaged if
they come into contact with high-pressure water.
• Traction related parts
• Steering parts
• Suspension parts
• Brake parts
●
Keep the cleaning nozzle at least 30 cm (11.9 in.) away from the vehicle
body. Otherwise resin section, such as moldings and bumpers, may be
deformed and damaged. Also, do not continuously hold the nozzle in the
same place.
●
Do not spray the lower part of the windshield continuously.
If water enters the air conditioning system intake located near the lower
part of the windshield, the air conditioning system may not operate cor-
rectly.
●
Do not wash the underside of the vehicle using a high pressure car
washer.
position, the wipers may operate and the
Advertisement
Table of Contents
