Table of Contents
Advertisement
■
When "Smart Entry & Start System Malfunction See Owner's Manual" is
displayed on the multi-information display
The system may be malfunctioning. Have the vehicle inspected by your
Toyota dealer immediately.
■
Battery-saving function
The battery-saving function will be activated in order to prevent the electronic
key battery and the 12-volt battery from being discharged while the vehicle is
not in operation for a long time.
●
In the following situations, the smart entry & start system may take some
time to unlock the doors.
• The electronic key has been left in an area of approximately 2 m (6 ft.) of
the outside of the vehicle for 10 minutes or longer.
• The smart entry & start system has not been used for 5 days or longer.
●
If the smart entry & start system has not been used for 14 days or longer,
the doors cannot be unlocked at any doors except the driver's door. In this
case, take hold of the driver's door handle, or use the wireless remote con-
trol or the mechanical key, to unlock the doors.
■
Electronic Key Battery-Saving Function
When battery-saving mode is set, battery depletion is minimized by stopping
the electronic key from receiving radio waves.
Press
twice while pressing and
holding
. Confirm that the electronic
key indicator flashes 4 times.
While the battery-saving mode is set, the
smart entry & start system cannot be
used. To cancel the function, press any of
the electronic key buttons.
3-2. Opening, closing and locking the doors
163
3
Advertisement
Table of Contents
