Table of Contents
Advertisement
302
4-5. Using the driving support systems
The Blind Spot Monitor on/off screen and indicator
2
The Blind Spot Monitor function and Rear Cross Traffic Alert function can
be switched on and off using the multi-information display. (P. 126)
When switched on, the BSM indicator illuminates on the meter and the
buzzer sounds.
Rear Cross Traffic Alert buzzer (Rear Cross Traffic Alert function
3
only)
When a vehicle approaching from the right or left rear of the vehicle is
detected, a buzzer sounds from the driver's side instrument panel.
RCTA detection screen (RCTA function only)
4
If a vehicle approaching from the right or left at the rear of the vehicle is
detected, the RCTA detection screen will be shown on the multi-informa-
tion display.
Changing settings of the Blind Spot Monitor function and Rear
Cross Traffic Alert function
The Blind Spot Monitor function and Rear Cross Traffic Alert function
can be enabled/disabled on the
information display.
Once the systems are disabled, the systems will not be enabled until they
are enabled by the
systems are not automatically enabled even when the hybrid system is
restarted.)
screen (P. 126) of the multi-
screen of multi-information display again. (The
Advertisement
Table of Contents
