Table of Contents
Advertisement
284
4-5. Using the driving support systems
Adjusting the set speed
● Adjusting the set speed by the lever
To change the set speed, operate the lever until the desired set
speed is displayed.
Increases the speed
1
(Except when the vehicle has been
stopped by system control in vehi-
cle-to-vehicle
mode)
Decreases the speed
2
Fine adjustment: Momentarily
move the lever in the desired
direction.
Large adjustment: Hold the lever up or down to change the speed,
and release when the desired speed is reached.
In the vehicle-to-vehicle distance control mode, the set speed will
be increased or decreased as follows:
Fine adjustment: By 1 km/h (0.6 mph)
time the lever is operated
Large adjustment: Increases or decreases in 5 km/h (3.1 mph)
mph (8 km/h)
In the constant speed control mode (P. 288), the set speed will be
increased or decreased as follows:
Fine adjustment: By 1 km/h (0.6 mph)
time the lever is operated
Large adjustment: The speed will continue to change while the lever is
held.
*
1
: When the set speed is shown in "km/h"
*
2
: When the set speed is shown in "MPH"
● Increasing the set speed by the accelerator pedal
Accelerate with accelerator pedal operation to the desired vehicle
1
speed.
Push the lever down.
2
distance
control
*
2
increments for as long as the lever is held
*
1
or 1 mph (1.6 km/h)
*
1
or 1 mph (1.6 km/h)
*
2
each
*
1
or 5
*
2
each
Advertisement
Table of Contents
