Table of Contents
Advertisement
126
2. Instrument cluster
Settings display
The operation contents of the driving support systems and settings
related to the combination meter display can be changed.
Driving support systems such as the PCS (Pre-Collision System) (if
equipped) and Blind Spot Monitor (if equipped) is turned on and off by sim-
ply pressing
■
Setting procedure
Press
1
wheel and select
Press
2
item to change, and then press
If the function is turned on and
off or the sensitivity, etc. is
changed on the setting screen,
the setting is changed each time
the
is pressed.
For functions that allow opera-
tion contents, display contents,
etc., of a function to be selected,
the setting screen is displayed.
When the setting screen is displayed, select the setting or
3
desired value (time, etc.) with the meter control switches.
For selectable operation con-
tents and setting values, select
the desired setting or value, and
then press
To stop the selection, press
When the setting check screen
is displayed, select proceed or
cancel and press
*
1
: Depending on the items, a subsequent setting screen may be dis-
played after selecting an item.
*
2
: For items which set the adjustment level or time, after the item is set,
the setting screen remains displayed until
. Make sure not to cancel the systems accidentally.
or
of the meter control switches on the steering
.
or
of the meter control switches and select the
.
.
.
.
is pressed.
1, 2
*
Advertisement
Table of Contents
