Appendix A: Restoring Factory Default Settings - ControlByWeb WebRelay-Quad X-WR-4R1-5 User Manual

Revision 2.2b WebRelay-Quad Users Manual
TM

Appendix A: Restoring Factory Default Settings

In the event that the IP address or passwords are forgotten, WebRelay-Quad may be restored to its original factory
TM
default settings. To do this, first remove the power from the unit. Next, insert a thin object (such as a toothpick)
through the small hole in the bottom of the unit to press the small button that is located inside the unit. When the
object is inserted, a tactile feel can be detected as the button is depressed. While holding the button down, apply
power and wait for about 10 seconds. After about 10 seconds, release the button. Now all settings will be back to
the original factory defaults. CAUTION: DO NOT USE METAL OBJECTS FOR THIS FUNCTION.
Small hole
to access
Reset Button
Xytronix Research & Design, Inc. page 33