Option 2: Assign A Temporary Ip Address To Configuration Computer - ControlByWeb WebRelay-Quad X-WR-4R1-5 User Manual

Revision 2.2b
Linux/Unix:
Open a terminal, change to root user (su -, then enter root password).
Type...
Next, type...
Mac OS X
Open a terminal,
Note that the terminal is in the "Utilities" directory which is in "Applications" directory.
Next, type...

2.3.2 Option 2: Assign a temporary IP address to configuration computer

If the first option above is not used, you can use this option to communicate with WebRelay-Quad
default, WebRelay-Quad
WebRelay-Quad
TM
the same network as WebRelay-Quad
192.168.1.5) .
Xytronix Research & Design, Inc.
arp -s {new IP address} {serial number of WebRelay-Quad
Note: IP address format is: xxx.xxx.xxx.xxx
Serial number format is: ss:ss:ss:ss:ss:ss
For example, to set a WebRelay-Quad
to 10.10.10.40 the following command would be used.
arp -s 10.10.10.40 00:0c:c8:01:00:01
ping -s 102 {new IP address}
For example, if the new IP address is 10.10.10.40, the following command would be
used.
ping -s 102 10.10.10.40
type
sudo arp -s {new IP address} {serial number of WebRelay-Quad
Note: Administrator password is required.
IP address format is: xxx.xxx.xxx.xxx
Serial number format is: ss:ss:ss:ss:ss:ss
For example, to set a WebRelay-Quad
to 10.10.10.40 the following command would be used.
sudo arp -s 10.10.10.40 00:0c:c8:01:00:01
ping -s 102 {new IP address}
For example, if the new IP address is 10.10.10.40, the following command would be
used.
ping -s 102 10.10.10.40
comes from the factory with an IP address of 192.168.1.2. Communications with
TM
may be established by assigning an IP address to the configuration computer that is on
(for example the configuration computer could be assigned to
TM
WebRelay-Quad
}
TM
device (with serial number 00-0C-C8-01-00-01 )
TM
device (with serial number 00-0C-C8-01-00-01 )
TM
Users Manual
TM
}
TM
. By
TM
page 13