KTM 350 EXC-F AUS 2012 Setup Instructions
  1. Manuals
  2. Brands
  3. KTM Manuals
  4. Motorcycle
  5. 350 EXC-F AUS 2012
  6. Setup instructions
KTM 350 EXC-F AUS 2012 Setup Instructions

KTM 350 EXC-F AUS 2012 Setup Instructions

Hide thumbs Also See for 350 EXC-F AUS 2012:
Table of Contents

Advertisement

Quick Links

Download this manual
SETUP INSTRUCTIONS
2012
350 EXC‑F EU
350 EXC‑F AUS
350 EXC‑F SIX DAYS EU
350 EXC‑F USA
350 XCF‑W USA
Art. no. 3211775en

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 350 EXC-F AUS 2012 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for KTM 350 EXC-F AUS 2012

Summary of Contents for KTM 350 EXC-F AUS 2012

  • Page 1 SETUP INSTRUCTIONS 2012 350 EXC‑F EU 350 EXC‑F AUS 350 EXC‑F SIX DAYS EU 350 EXC‑F USA 350 XCF‑W USA Art. no. 3211775en...
  • Page 3 KTM accepts no liability for delivery options, deviations from illustrations and descriptions, as well as misprints and other errors.

  • Page 4: Means Of Representation

    MEANS OF REPRESENTATION Symbols used The meaning of specific symbols is described below. Indicates an expected reaction (e.g. of a work step or a function). Indicates an unexpected reaction (e.g. of a work step or a function). Indicates a page reference (more information is provided on the specified page). Indicates information with more details or tips.
  • Page 5 SETUP Unpacking and setting up the vehicle Packaging 2 – Remove the box and the plastic packaging. Info To avoid damaging the motorcycle during the setup, leave the protective film on the vehicle until you have finished. – Remove the separate enclosure and unpack it. Check that the scope of delivery is complete on the basis of the enclosed packing list.
  • Page 6 SETUP (XCF‑W) – Insert the indicator lamp with the brown/red and yellow/blue cable colors into socket – Insert indicator lamp LED with the white and orange cable colors into socket – Connect pull switch with the yellow and white cables. C00115-10 (All EXC‑F models) –...
  • Page 7 SETUP – Position the handlebar. Info Make sure cables and wiring are positioned correctly. – Position the handlebar clamps. Mount and tighten the screws. Guideline Screw, handlebar clamp 20 Nm (14.8 lbf ft) Info The markings on the handlebar should be at the center of the handlebar clamps.
  • Page 8 Read the notes in the battery package. – Charge the battery. ( p. 11) – Install the battery. ( p. 10) – Unpack and mount the KTM PowerParts included in the delivery (optional). Info Read the accompanying KTM PowerParts installation instructions.
  • Page 9 Apply the label included in the delivery (optional). – Refuel. ( p. 12) – Position all controls in their exact positions on the handlebar. Tighten all screws. – Print out the current PDI form found on KTM DEALER.NET and perform the delivery inspection.

  • Page 10: Removing Headlight Mask With Headlight

    WORK Removing headlight mask with headlight – Switch off all electrical equipment. – Remove screw and take off clamp. – Loosen the rubber band . Push up the headlight mask and swing it forwards. 101401-10 – Pull out the electric plug connector and remove the headlight mask with the headlight.
  • Page 11 WORK – Check the headlight setting. The boundary between light and dark must be exactly on the lower mark for a motorcycle with driver. » If the light-dark border does not meet specifications: – Adjust the headlight range. Installing the shock absorber Main work –...
  • Page 12 WORK Installing the front fender – Ensure that the spacers are mounted in the fender. – Position the front fender. Mount and tighten screws Guideline Remaining screws, chassis 10 Nm (7.4 lbf ft) Info Make sure the holding lugs engage in the start number plate or headlight mask.
  • Page 13 – Do not discard batteries with the household trash. Dispose of a defective battery in an environmentally compatible manner. Give the battery to your KTM dealer or to a recycling center that accepts used batteries. Warning Environmental hazard Hazardous substances cause environmental damage.
  • Page 14 WORK Opening filler cap 3.11 Danger Fire hazard Fuel is highly flammable. – Never refuel the vehicle near open flames or burning cigarettes, and always switch off the engine first. Be careful that no fuel is spilt, especially on hot vehicle components. Clean up spilt fuel immediately. –...
  • Page 15 WORK – Only refuel with clean fuel that meets the specified standards. Warning Environmental hazard Improper handling of fuel is a danger to the environment. – Do not allow fuel to get into the ground water, the ground, or the sewage system. –...

  • Page 16: Technical Data - Tightening Torques For Chassis

    TECHNICAL DATA - TIGHTENING TORQUES FOR CHASSIS – Spoke nipple, front wheel M4.5 5… 6 Nm (3.7… 4.4 lbf ft) – Screw, battery terminal 2.5 Nm (1.84 lbf ft) – Screw, intake air temperature sensor 2 Nm (1.5 lbf ft) –...
  • Page 17 SUBSTANCES Super unleaded (ROZ 95/RON 95/PON 91) According to – DIN EN 228 (ROZ 95/RON 95/PON 91) Guideline – Only use unleaded super fuel that matches or is equivalent to the specified fuel grade. – Fuel with an ethanol content of up to 10 % (E10 fuel) is safe to use. Info Do not use fuel containing methanol (e.

  • Page 18: Auxiliary Substances

    AUXILIARY SUBSTANCES Long-life grease Guideline – ® KTM recommends Motorex products. Supplier ® Motorex – Bike Grease 2000...
  • Page 19 *3211775en* 3211775en KTM-Sportmotorcycle AG 5230 Mattighofen/Austria http://www.ktm.com...

This manual is also suitable for:

350 exc-f eu 2012350 exc-f six days eu 2012350 exc-f usa 2012350 xcf-w usa 2012

Table of Contents