30/Engine Assembly; Installing The Crankshaft; Installing The Transmission Shafts; Installing The Shift Forks - KTM 350 EXC-F EU 2012 Repair Manual

30/ENGINE ASSEMBLY

Installing the crankshaft

21.1

Installing the transmission shafts

21.2

Installing the shift forks

21.3
–
Position the right section of the engine case in the engine work stand.
–
Oil the bearing.
Engine oil (SAE 10W/50) (
–
Push crankshaft
305032-10
–
Oil the bearing.
Engine oil (SAE 10W/50) (
–
Slide both transmission shafts
305031-11
–
Mount lock ring
305030-11
–
Shift fork
1
main shaft.
–
Mount shift fork
–
Mount shift fork
–
Slide on shift rollers
Tip
Fix the shift rollers in the shift forks with grease.
305029-10
p. 268)
into the bearing seat.
1
p. 268)
into the bearing seats together.
1
.
2
has a smaller inside diameter; mount this in the shift groove of the
in the lower shift groove of the countershaft.
2
in the upper shift groove of the countershaft.
3
.
4
157