Table of Contents
Advertisement
Installing the Device
2.5.3 Wiring Examples
5.
6.
2.5.3
Wiring Examples
The following illustrate how to connect power to single and dual power supplies.
Figure 2.8
18
If the external PoE power supply features a chassis ground connection, connect
the ground terminal on the power supply to terminal 4 on the terminal block.
DANGER
Electrocution hazard – risk of death, serious personal injury and/or damage
to the device
Make sure the supplied terminal block cover is always installed before the
device is powered.
Install the terminal block cover.
DC and 48 VDC PoE Power Supply
RUGGEDCOM RSG2300PF
Installation Manual, 04/2021, C79000-G8976-1348-09
Advertisement
Table of Contents
