Table of Contents
Advertisement
1
1
2
Figure 4.7
For specifications on the available fiber optic Ethernet ports, refer to
Ethernet Port Specifications (Page
4.4
SFP Transceivers
The RUGGEDCOM RSG2300PF supports up to two Small Form-Factor Pluggable (SFP)
transceiver sockets, which are compatible with a wide array of SFP transceivers
available from Siemens.
LEDs
Each socket features an LED that indicates its link state.
Yellow (Solid)
Yellow (Blinking)
Off
Compatible SFP Transceivers
For more information about which SFP transceivers are compatible with
the RUGGEDCOM RSG2300PF, as well as instructions for ordering and
installation/removal, refer to the
support.industry.siemens.com/cs/ca/en/view/109482309].
IMPORTANT
Only use SFP transceivers approved by Siemens for RUGGEDCOM products. Siemens
accepts no liability as a result of performance issues related in whole or in part to
third-party components.
4.5
GBIC Optic Ethernet Ports
GBIC (Gigabit Interface Converter) optic Ethernet ports are available with SC
(Standard or Subscriber Connector) connectors.
RUGGEDCOM RSG2300PF
Installation Manual, 04/2021, C79000-G8976-1348-09
Tx Connector
Rx Connector
SC Port
State
2
1
Tx Connector
1
Rx Connector
2
Figure 4.8
33)".
Link established
Activity
No link detected
RUGGEDCOM SFP Transceiver Catalog [https://
Communication Ports
4.4 SFP Transceivers
2
ST Port
"Fiber Optic
Description
27
Advertisement
Table of Contents
