ICS ELECTRONICS 4863 Manual page 94

TABLE 3-3
Keyword
:BYTe?
[:DIGital]
:DATA
[:VALue]?
:PORT?
:PORTn?
:POLarity
:RESet:EDR
[SOURce]
[:DIGital]
:DATA
[:VALue][?]
SCPI COMMANDS AND QUERIES
(CONTINUED)
Default
Value
- Reads byte selected by the byte parameter.
Bit logic levels set by the last
SOURCe:DATA:PORTn:POL command.
Byte value is 1 to n bytes. Response is 0 to
255.
- Optional digital data identifier
- Digital data identifier
- Reads input ports selected by Configure
branch. Format set by FORMat:TALK set-
ting.
- Returns value of bytes specified in the at-
tached number or channel list. Format set
by FORMat:TALK setting. Value is 1 to 6
- Queries the value of byte n. Format set by
FORMat:TALK setting. Value of n is 1 to
6
255 Sets input byte logic true polarity for the
SENSe branch. Bits may be set indepen-
dently. Value is 0 to 255. May be queried
to read current polarity.
Resets 4863 EDR or 4803 EDR #1 flip-flop
without reading the input data.
Starts direct digital byte output branch
Optional branch identifier
- Optional digital data identifier
- Digital data identifier
- Writes data string to output bytes set by the
Configure branch.
FORM:LISTen setting. Can be queried to
read back last output value.
3-27
Description
Format set by
3