ICS ELECTRONICS 4863 Manual page 9

1.3.2 OEM Board Part Numbers and Configurations
OEM Board versions of the 4863 and 2363 are available in the configurations
shown in Table 1-1. On OEM Boards, the GPIB connector is a vertical
1
header that mates with one of ICS's GPIB Connector/Address Switch
Assemblies which may be used to mount an Address Switch and a GPIB
Connector on the user's rear panel. (See Appendix A) An LED header is
provided to remote the LEDs and the power switch is removed. A separate
header is provided for the optional serial interface. The Digital I/O
connector remains the same. Refer to Figure 1-6 for the OEM Board layout.
Most of the options listed in paragraph 1.3.1 can be applied to the board
product by adding the dash number after the part number.
e.g. 114504-11-7 specifies a 114504-11 Board with a custom program.
Part
Number
114504-11
114504-12
114504-13
TABLE 1-1 OEM BOARD CONFIGURATIONS
Number of
Digital Signals
48
48
48
Interfaces
GPIB RS-232 RS-485
Yes No
No Yes
Yes Yes
1-4
No
Yes
Yes