ICS ELECTRONICS 4863 Manual page 91

Keyword
POLarity
HANDshake
3
CLEar
EDR
INH
REMote
RESet
STRobe
TRIGger
ASTATus
BSTATus
TABLE 3-3 SCPI COMMANDS AND QUERIES
Default
Value
1
OFF
0
0
1
0
0
0
1
1
(CONTINUED)
Description
Sets logical true level for output data. Re-
quires that outputs be assigned first. Values
is 0 or 1.
Enables or disables output data handshak-
ing. Enable handshaking to output data to
devices that only accept data at certain times
or that need to handshake in data. Values are
OFF | ON.
Sets the active level of the 4863 Clear output
pulse. Values are 0 | 1.
Sets the active level of the EDR input signal
(both EDRs in 4803). A value of 1 selects
positive signal transition. A value of 0
selects negative signal edge. Values are 0 |
1.
Sets the active level for the Inhibit output
signal (both Inhibits in 4803).
Values are 0 | 1.
Sets the active level for the Remote output
signal. Values are 0 | 1.
Sets the active level of the Reset output
pulse. Values are 0 | 1.
Sets the active level of the Data Strobe
output pulse. Values are 0 | 1.
Sets the active level of the Data Strobe
output pulse. Values are 0 | 1.
Sets the logical true level for the Status A
input signal. Values are 0 | 1.
Sets the logical true level for the Status B
input signal. Values are 0 | 1.
3-24