ICS ELECTRONICS 4863 Manual page 32

2.5 THE SUPPORT CD
The Support CD-ROM contains Configuration Programs, useful utility
programs and example programs for ICS's interface products. The
Configuration Programs folder contains DOS and Windows configuration
programs that walk the user through a menu to configure the card's power-
on condition. The following configuration programs run on Intel type PCs
and operate the following GPIB Controller cards and interfaces:
Windows
niconf_w.exe
GPIBkybd.exe ICS 488-USB, 488-PCI, 488-PCILt, 488-PCM,
DOS
mconfig.exe
niconf.exe
hpconf.exe
sconfig.exe
The niconf_w.exe program is in the niconf_zip.exe file on the Configuration
Programs folder on the Support CD-ROM. To recover the program file,
create a new directory and copy the niconf_zip.exe file to it. Double-click
on the file or use Windows Zip-it utility to run the self-extracting zip file and
extract the niconf_w.exe program file. The DOS programs are in the DOS
directory.
Supported GPIB Controllers
ICS 488-USB, 488-PCI, 488-PCILt, 488-PCM,
and 488-cPCI Cards, Measurement Computing or
National Instruments Cards. See para 2.6
and 488-cPCI Cards, Measurement Computing or
National Instruments Cards. See para 2.7
Supported card or Interface
ICS 488-PC2 Card
National Inst. GPIB-PC2a Card
(Set to address 2E1 and to 7210 emulation)
or an NEC 7210 compatible GPIB Controller
Card that is set to 2E1.
National Instruments AT-GPIB Card
(Set to address 2C0H)
Hewlett-Packard HP-IB Card
(Set to address DC000)
PC COM1 or COM2 port
2-3
2