ICS ELECTRONICS 4863 Manual page 159

A3
Figure A-9
A3.2 BOARD INSTALLATION
Both the Horizontal and the Vertical Connector/Switch Board
Assemblies are designed to be mounted to the rear panel of the host
equipment's rear panel by the included metric studs. The following
are the suggested installation steps:
3.50
(a) Horizontal/Connector Assembly
(b) Vertical Connector/Switch Assembly
GPIB Connector/Switch Board Assemblies
A-28
1.35
0.532
3.00
1.65
0.532
0.887
0.887