Osd - Additional Setting Options; Selecting The Interface As Current Video Source - Caraudio-Systems v.LOGiC Intelligent Solution V5-NTG46 Manual

4.1.2. OSD – Additional setting options
The following settings in the OSD-menus OPTION and OSD can be configured over and above
the described settings in this manual (Operation of the OSD: see chapter "OSD-Operation"):
OSD-menu Menu item
POS. X
POS. Y
OSD
SIZE
OSD TIMEOUT
INFO VERSION
OPTION FACTORY RESET
4.2. Selecting the interface as current AV-source
Long press = enter / leave interface level
Press long "left arrow" button to choose the interface as current video source.
Short press "hang-up" button switch the video sources (cameras). Each short press will
switch to the next enabled input. If all inputs are enabled the order is:

FRONT CAM REAR CAM
Inputs which are not enabled are skipped.
Version 18.11.2016
Setting
0-xxx
0-xxx
SMALL
LARGE
2-20
X.XX.XX

...
Explication
Horizontal position of the OSD
Vertical position of the OSD
Small OSD menu windows
Large OSD menu windows
Time setting for automatic OSD shutoff
Displays the current SW-version
Resetting to factory settings
Short press = switch video sources
V5-NTG46