Settings For Connecting An After-Market Front Camera - Caraudio-Systems v.LOGiC Intelligent Solution V5-NTG46 Manual

3.2.1.2.

Settings for connecting an after-market front camera

You have to configure some settings in the OSD-menus INPUTS and MISC if you want to
connect an after-market front camera (Operation of the OSD: see chapter "OSD-Operation").
OSD-menu Menu item
FVC
INPUT
PARK LOGIC
OPTION
Note: You can deactivate the enabled parking process by pressing the "right arrow" button
on steering wheel. After deactivation you can't enable the parking process again until the
vehicle is diving faster than 30km/h or the ignition is switched off.
Version 18.11.2016
Setting Explication
OFF Keine Frontkamera angeschlossen
Switches to front camera if parking process is
ON
enabled and reverse gear is released
Enabled while parking process
RGearOnly
Enabled while parking process and up to
RGearSpeed
30 km/h
Enabled while parking process and up to
RGearTime
20 second
V5-NTG46