Table of Contents
Advertisement
Quick Links
dvbLOGiC DVB-T Tuner
DVB-E65-TV
Compatible with BMW E65 Professional
navigation systems
with 8.8" monitor
Vehicles with factory TV-tuner port
(Factory TV-tuner must be uninstalled)
Product features
• Full plug and play vehicle-specific dual DVB-T Tuner
• with two active DVB-T glass-mount antennas
• integrated into and controllable by vehicle infotainment
• AV-input with IR-control channel (optionally USB-AV-port DVBU-XXX instead AV-input)
• control of after-market devices, e.g. DVD-player, DVD-changer, USB/iPod devices, ...
• after-market rear-view camera input
• automatic switching to rear-view camera input (only from dvbLOGiC mode)
• rear-view camera power (max 0.5A)
• rear-seat-entertainment AV-output for AV-sources connected to the dvbLOGiC
• optional remote control for full DVB-tuner functions/rear-seat-entertainment
• power on remote out trigger signal (+12V) to switch on connected devices
Version 13.02.2013
DVB-E65-TV
Advertisement
Table of Contents
Related Manuals for Caraudio-Systems dvbLOGiC DVB-E65-TV
Summary of Contents for Caraudio-Systems dvbLOGiC DVB-E65-TV
- Page 1 dvbLOGiC DVB-T Tuner DVB-E65-TV Compatible with BMW E65 Professional navigation systems with 8.8” monitor Vehicles with factory TV-tuner port (Factory TV-tuner must be uninstalled) Product features • Full plug and play vehicle-specific dual DVB-T Tuner • with two active DVB-T glass-mount antennas •...
-
Page 2: Table Of Contents
• video-in-motion Contents 1. Prior to Installation 1.1. Delivery contents 1.2. Check compatibility of vehicle and accessories 1.3. Setting the dip switches of the CAN-box TV-436 1.4. Setting the dip switches of the tuner-box DVBC-M436 1.4.1. Automatic switching to rear-view camera 1.4.2. -
Page 3: Prior To Installation
Legal Information By law, watching moving pictures while driving is prohibited, the driver must not be distracted. We do not accept any liability for material damage or personal injury resulting, directly or indirectly, from installation or operation of this product. This product should only be used while standing or to display fixed menus or rear-view-camera video when the vehicle is moving, for example the MP3 menu for DVD upgrades. -
Page 4: Check Compatibility Of Vehicle And Accessories
1.2. Check compatibility of vehicle and accessories Requirements Vehicle 7series (E65/E66) Navigation Navigation system Professional E65 (older 1/2-button iDrive or CIC (newer 8-button iDrive) with 8.8” monitor Limitations factory-TV-tuner Must NOT be installed. factory DVD-changer After-market rear-view camera cannot be connected to or factory nightvision the dvbLOGiC interface. -
Page 5: Automatic Switching To Rear-View Camera
1.4.1. Automatic switching to rear-view camera Dip switches If an after-market rear-view camera shall be connected or a factory of tuner-box rear-view camera is connected, in order for the dvbLOGiC to automatically switch to its camera input, when reverse is engaged set dip2 = ON (up). -
Page 6: Installation Of Can-Box Tv-436
2.1. Installation of CAN-box TV-436 The CAN interface is connected to the backside of the OEM screen. Remove 3 TORX screws at the OEM screen. Remove cover grill (only plugged). Place soft towel beneath the navigation monitor to avoid scratches Flip down the board monitor. - Page 7 Remove 12-pin insert from black vehicle harness connector. Insert 12-pin insert into black connector of the CAN interface harness TV-BMW65. Insert the completed black connector into CAN interface harness TV-BMW65. Connect 12-pin insert from CAN interface harness TV-BMW65 into black connector from vehicle harness.
-
Page 8: Installation Of Tuner-Box Dvbc-M436
2.2. Installation of tuner-box DVBC-M436 The fibre optical interface installation is made at the navigation computer, which is located at the left side in the trunk behind a cover and has to be removed. The factory TV-tuner must be uninstalled. Remove the factory optical leads of the factory TV-tuner port (blue female connector) and connect it to the black male MOST®-connector enclosed to... -
Page 9: Antennas And Optional Ir-Remote Control Set
2.3. Antennas and optional IR-remote control set Mount antennas ANT-12 and connect them to the female f-plug connectors on front of tuner-box DVBC-M436. We strongly recommend to first test the reception quality of the chosen mounting position of the antennas before final installation! See “Appendix C – Antenna positioning”... -
Page 10: Av-Source
2.4.1. AV-source The dvbLOGiC has the possibility to connect and remotely control by navigation buttons a pre-programmed device. The device list in the device control table shows the pre- programmed remote channels and the related IR-remote cables STA-xxx which must be ordered separately for the control of the device. -
Page 11: After-Market Rear-View Camera
2.4.3. After-market rear-view camera Connect the video RCA of the after-market rear-view camera to the female RCA connector R-CAM IN of tuner-box DVBC-M436. The green wire of harness C2C-BMW02 can be used as +12V power (max 1A) supply for the rear-view camera. Note: Automatic switching to the camera-input when reverse gear is engaged works only in dvbLOGiC mode. -
Page 12: After-Market Rear-Seat-Entertainment
2.4.4. After-market rear-seat-entertainment Using RCA-cables, connect the rear-seat-entertainment to the female RCA-connector VIDEO OUT of tuner-box DVBC-M436. Note: As the output is a full output, not shared with the video signal for the navigation system, splitting the video with an RCA Y-cable might give a good enough picture for two rear-seat-entertainment monitors. -
Page 13: Operation
3. Operation 3.1. Activation of the video-in-motion function The video-in-motion function is permanently active without disturbing the navigation performance. 3.2. Selecting the dvbLOGiC as current AV-source In the vehicle’s main menu, select Infotainment and then TV by iDrive to choose the dvbLOGiC as current AV-source. -
Page 14: Button Assignment Table Idrive
3.5. Button assignment table iDrive The button assignment table shows which functions of dvbLOGiC and additionally connected devices can be executed by iDrive. Once DVB-T or AV-input mode are activated the iDrive action in the left column will execute the function described in the corresponding device column. -
Page 15: Specifications
-30°C to +80°C Weight 328g Measurements (box only) B x H x T 140 x 30 x 105 mm 5. Technical Support Caraudio-Systems Vertriebs GmbH manufacturer/distribution In den Fuchslöchern 3 D-67240 Bobenheim-Roxheim email support@caraudio-systems.de Legal disclaimer: Mentioned company and trademarks, as well as product names/codes are registered trademarks ®...
Need help?
Do you have a question about the dvbLOGiC DVB-E65-TV and is the answer not in the manual?
Questions and answers