Intended Use - Bosch Rexroth ErgoSpin Series Installation Instructions Manual

3608870H86/2020-01 | ErgoSpin/CC-ErgoSpin
Safety instructions
2.9

Intended use

The ErgoSpin/CC-ErgoSpin hand-held nutrunner
is partly completed machinery in the sense of the
currently valid Machinery Directive, see
"Declaration of incorporation" from page 97.
You may use the product as follows:
• for installation in partly completed machinery
or in a machine and/or system
• for performing tightenings requiring a con-
tinuous course of the torque.
This product is not suitable for
tightening processes requiring
stepwise tightening of the connection
elements, e. g. impact wrenches.
The product is intended for industrial use and not
for private use.
The product may be commissioned only if it is
integrated in the machine/system for which it is
designed and the machine/system fully complies
with the EC Machinery Directive. Observe the
operating conditions and performance limits
specified in the technical data.
Operation of the hand-held nutrunner is only
permitted in accordance with the national
regulations for the electromagnetic compatibility
(EMC) for the respective application.
For instructions on EMC-compliant
installation, refer to the documen-
tation for the respective component.
Only accessories and add-on units that have been
approved for use in Rexroth tightening systems
may be used therein. Non-approved components
may neither be added nor connected to the
system. The same applies to cables and lines
which belong to the Rexroth tightening system.
Otherwise, functional and system safety is
jeopardized.
Bosch Rexroth AG
Intended use includes having read and un-
derstood this documentation and especially the
chapter "Safety instructions".
69/104