Extension And Conversion; Output Drives For Esv - Bosch Rexroth ErgoSpin Series Installation Instructions Manual

3608870H86/2020-01 | ErgoSpin/CC-ErgoSpin

Extension and conversion

13 Extension and conversion
The components of the ErgoSpin/CC-ErgoSpin
hand-held nutrunner must not be converted, i.e.,
the components must neither be opened nor
disassembled nor must the mechanical
properties (dimensions, holes, etc.) be changed.
In case of non-compliance, the warranty claim
will be forfeited.

13.1 Output drives for ESV

Tab.12: ESV angle heads
Order number (...S)
Order number (...G)
**)
Max. torque [Nm]
Typical efficiency
Reduction ratio
Tool mount
Order number (...S)
Order number (...G)
Max. torque **) [Nm]
Typical efficiency
Reduction ratio
Tool mount
*)
Can also be used with CC-ESV
Value refers to angle head
**)
*)
WH013S
WH013G
3 608 876 051 3 608 876 055
3 608 876 052 3 608 876 056
13
η= 0.95
i = 1.095
1/4'' square
WH075S
WH075G
3 608 876 061 3 608 876 063
3 608 876 062
75
η= 0.95
i = 1.563
1/2'' square
Bosch Rexroth AG
For the complete range of accessories see our
Online Product Catalog:
http://www.boschrexroth.com/tightening
WH040S WH056S
WH040G WH056G
3 608 876 057
3 608 876 058
40
η= 0.95 η= 0.95
i = 1.73 i = 1.16
3/8'' square 3/8'' square
WH100S WH150S
3 608 876 064
-
100
η= 0.95 η= 0.95
i = 1.421 i = 1.095
1/2'' square 1/2'' square
89/104
WH065S
WH065G
3 608 876 059
3 608 876 060
56 65
η= 0.95
i = 1.35
1/2'' square
WH220S
3 608 876 065
- -
150 220
η= 0.95
i = 1.588
3/4'' square