Work Area Safety; Elektrical Safety - Bosch Rexroth ErgoSpin Series Installation Instructions Manual

62/104 Bosch Rexroth AG
Safety instructions
2.2

Work area safety

Keep work area clean and well lit.

Cluttered or dark areas invite accidents.
Do not operate power tools in explosive

atmospheres, such as in the presence of
flammable liquids, gases or dust. Power
tools create sparks which may ignite the
dust or fumes.
Keep children and bystanders away while

operating a power tool.
Distractions can cause you to lose control.
ErgoSpin/CC-ErgoSpin | 3608870H86/2020-01
2.3 Electrical safety
Power tool plugs must match the outlet.

Never modify the plug in any way. Do not
use any adapter plugs with earthed
(grounded) power tools. Unmodified plugs
and matching outlets will reduce risk of
electric shock.
Avoid body contact with earthed or

grounded surfaces, such as pipes,
radiators, ranges and refrigerators. There
is an increased risk of electric shock if your
body is earthed or grounded.
Do not expose power tools to rain or wet

conditions. Water entering a power tool will
increase the risk of electric shock.
Do not abuse the cord. Never use the cord

for carrying, pulling or unplugging the
power tool. Keep cord away from heat, oil,
sharp edges or moving parts. Damaged or
entangled cords increase the risk of electric
shock.
When operating a power tool outdoors,

use an extension cord suitable for outdoor
use. Use of a cord suitable for outdoor use
reduces the risk of electric shock.
If operating a power tool in a damp

location is unavoidable, use a residual
current device (RCD) protected supply.
Use of an RCD reduces the risk of electric
shock.