Required And Amending Documentation - Bosch Rexroth ErgoSpin Series Installation Instructions Manual

58/104 Bosch Rexroth AG
About this documentation
1.2 Required and amending
documentation
ErgoSpin and CC-ErgoSpin hand-held
nutrunners are system components.
Only commission the product if the docu-

mentation marked with the
is available to you and you have understood
and observed it.
Tab.1: Required and amending documentation
Title
Safety instructions for Rexroth tightening systems
Documentation of the machine or system manu-
facturer
Instructions for the other system components
Generally applicable, legal and other binding regu-
lations of European and national legislation
Provisions for accident prevention and environ-
mental protection applicable in your country
DIN 13 sheet 13
Required and amending documentation created
by Rexroth is available in the media directory:
http://www.boschrexroth.com/mediadirectory
Additional information on the project
planning can be found in the project
planning manual of the Rexroth
tightening system. For information on
commissioning, please refer to the
online help for the operating system.
ErgoSpin/CC-ErgoSpin | 3608870H86/2020-01
book symbol
Document number Document type
Safety regulation
3 608 870 2EN