Service; Safety Warnings For Screwdriwers - Bosch Rexroth ErgoSpin Series Installation Instructions Manual

3608870H86/2020-01 | ErgoSpin/CC-ErgoSpin
Safety instructions
2.6

Service

Have your power tool serviced by a

qualified repair person using only
identical replacement parts. This will
ensure that the safety of the power tool is
maintained.
Bosch Rexroth AG
2.7 Safety Warnings for
Screwdriwers
Hold the power tool by insulated gripping

surfaces, when performing an operation
where the fastener may contact hidden
wiring. Fasteners contacting a "live" wire may
make exposed metal parts of the power tool
"live" and could give the operator an electric
shock.
Use suitable detectors to determine if there

are hidden supply lines or contact the local
utility company for assistance. Contact with
electric cables can cause fire and electric
shock. Damaging gas lines can lead to
explosion. Breaking water pipes causes
property damage.
Hold the power tool securely. When

tightening and loosening screws be prepared
for temporarily high torque reactions.
Secure the workpiece. A workpiece clamped

with clamping devices or in a vice is held more
secure than by hand.
Always wait until the power tool has come to

a complete stop before placing it down. The
application tool can jam and cause you to lose
control of the power tool.
Switch the power tool off immediately if

the application tool becomes blocked. Be
prepared for high torque reactions which
cause kickback. The application tool
becomes blocked when it becomes jammed
in the workpiece or when the power tool
becomes overloaded.
65/104