Industry Canada; Intended Use - Bosch GSR18V-800C Operating/Safety Instructions Manual

The manufacturer is not responsible for radio
interference caused by unauthorized modifica-
tions to this equipment. Such modifications
could void the user's authority to operate the
equipment.
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions:
1) This device may not cause harmful interfer-
ence, and
2) This device must accept any interference re-
ceived, including interference that may cause
undesired operation.
NOTE! This equipment has been tested and
found to comply with the limits for a Class B
digital devices, pursuant to Part 15 of the FCC
rules. These limits are designed to provide rea-
sonable protection against harmful interference
in a residential installation. This equipment gen-
erates, uses and can radiate radio frequency
energy and, if not installed and used in accor-
dance with the instructions, may cause harmful
interference to radio communications. However,
there is no guarantee that interference will not
occur in a particular installation. If this equip-
ment does cause harmful interference to radio
or television reception, which can be deter-
mined by turning the equipment off and on, the
This device complies with Industry Canada
licence-exempt RSS standard(s). Operation is
subject to the following two conditions:
(1) this device may not cause interference, and
The power tool is intended for driving and loos-
ening screws and for drilling in wood, metal, ce-
ramic and plastic. The GSB is also designed for
impact drilling in brick, masonry and stone.
6
2610070413 GSR18V800C 202308.indd 6
page heading FCC Caution
user is encouraged to try to correct the interfer-
ence by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equip-
ment and receiver.
• Connect the equipment into an outlet on a cir-
cuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV
technician for help.
"Exposure to Radio Frequency (RF) Signals:
The wireless device is a radio transmitter and
receiver. It is designed and manufactured not
to exceed the emission limit for exposure to ra-
dio frequency (RF) energy set by the Ministry
of Health (Canada), Safety Code 6. These limits
are part of comprehensive guidelines and estab-
lished permitted levels of RF energy for the gen-
eral population.
These guidelines are based on the safety stan-
dards previously set by international standard
bodies. These standards include a substantial
safety margin designed to assure the safety of
all persons, regardless of age and health.
This device and its antenna must not be co-lo-
cated or operating in conjunction with any other
antenna or transmitter.

Industry Canada

(2) this device must accept any interference,
including interference that may cause unde-
sired operation of the device.

Intended use

With the Bluetooth® Low Energy Module GCY
42 inserted, power tool data and settings can
be transferred between the power tool and a
mobile device by means of Bluetooth® wireless
technology.
SAVE THESE INSTRUCTIONS
8/3/23 11:05 AM