Table of Contents
Advertisement
For Android Users
Tap Play Store to download IPCamPlus, or scan the following QR code.
Open IPCamPlus, then choose tab Groupings. Select a group, choose a IP camera type, and add an
IP camera.
Next, enter IP camera information as follows:
1. Cam Name: IP Camera or DVR camera name
2. URL: IP address
3. Port
4. Enter your username and password. The default IP camera user name is admin, password pass.
The default DVR user name is admin, password 1111.
After you enter the above information, tap Done to save the changes, and the live view of your IP
camera or DVR will appear.
Note:
The IPCamplus APP communicate with the camera directly through the IP address, not through the network service
platform. Therefore, to connect the camera from the external network to the internal network, you need to ask the
network administrator to set the NAT on the router. Although it is not very convenient, but, it does not need to go
through the network service platform, the security of the data can be ensured, and It is no need to worry about the
IPCamplus APP being unavailable after the network service platform stops serving.
iCAM-MR/ZMR Series User Manual
ICP DAS
55
Advertisement
Table of Contents
