Ip Camera List Operation Interface - ICP DAS USA iCAM-MR User Manual

2-3 IP Camera List Operation Interface

After the ICP DAS iCAM IP Cameras are added to the IP Camera list via manual work, the IP Cameras
will be listed as below:
The following functions allow to perform settings or rearrange the orders of the IP Cameras. Please
select the IP Camera and click on the function button to perform the operations:
 Setting: Click the radio button in front of the IP Camera and click on "Setting" to get into the
setting page of the iCAM IP Camera. The settings for each iCAM IP Camera will be given in the
following section.
 Move Up: Click the radio button in front of the iCAM IP Camera and click on "Move Up" to
move the iCAM IP Camera to upper order (decrease the index number (No)).
 Move Down: Click the radio button in front of the iCAM IP Camera and click on "Move Down"
to move the iCAM IP Camera to lower order (increase the index number (No)).
 Copy: To copy the settings of a pre-set iCAM IP Camera to the new iCAM IP Camera, please click
the radio button in front of the pre-set iCAM IP Camera and then click on "Copy", a new iCAM
IP Camera (in sequence) will be added to the list and the settings of the old iCAM IP Camera will
be copied to this newly added iCAM IP Camera.
 Remove: Click the radio button in front of the iCAM IP Camera and click on "Remove" to
remove the selected iCAM IP Camera.
After all settings are completed, click "Save" button to save the changes. The following will describe
the setting of ICP DAS iCAM IP Camera.
iCAM-MR/ZMR Series User Manual
Figure5: iCAM IP Camera List Operation Interface
ICP DAS 15