Timer - ICP DAS USA iCAM-MR User Manual

5-1-3 Timer

You can change the time of your camera through a HTML web page. Simply select the date and time in
the drop-down menus, and click Submit to apply. You may also set the daylight saving time in this page.
Synchronize with an NTP server Note: This function requires Internet connection.
To synchronize with an NTP server, change the Synchronize with NTP to Every Hour. The camera will synchronize its
system time with a time server every hour.
Synchronize with an WISE controller Note: This function requires Internet connection.
To synchronize with an WISE controller, need to set up the IP camera on the WISE. Enable the "Time Synchronization",
and the WISE will synchronize the IP camera time.
iCAM-MR/ZMR Series User Manual ICP DAS 29