Tampering Detection; Alarm Detection; Network Detection; Push Service Setting - ICP DAS USA iCAM-MR User Manual

6-4-3 Tampering Detection

The IP camera can send tamper alarms when the focus or view of the IP camera is changed, or the lens is
obstructed by paint or stain. Click Enable to activate this function and configure the settings.

6-4-4 Alarm Detection

If you connect an external alarm digital input to the IP camera, enable Alarm Notification and switch
between NO (normally open) and NC (normally closed) for the input.

6-4-5 Network Detection

Enable this option to send a notification upon network failure.

6-4-6 Push Service Setting

After an alarm event occurs, iOS or Android alarm events can be pushed. When IPCamPlus is
connected to the camera, this form will record the ID of the push phone. You can use this form to
determine whether IPCamPlus has completed the connection with the camera. Click Delete to
cancel the push service of the mobile phone.
iCAM-MR/ZMR Series User Manual ICP DAS 47