Maintenance - ICP DAS USA iCAM-MR User Manual

5-4 Maintenance


Initialize without Network Settings:
The network account ID, password, camera name, IP addresses, subnet mask and gateway will be kept,
all others settings will be restored to factory settings.

Initialize All Settings: Restoring all items to factory settings
In the Maintenance page, to update the firmware of your IP camera, click Choose File and locate the update file. Click
Submit to start the firmware update. To export the configuration file of your IP camera, click Export. To import the
configuration file of IP camera, click Choose File beside the Import and click Upgrade.
In the Maintenance page, you can click Load Default to restore the camera to factory settings, or click Reboot System to
restart the camera.
Warning: Never disconnect the power during the update. This could cause irreversible damage to your device.
iCAM-MR/ZMR Series User Manual
Restoring to factory settings does not affect the network settings.
ICP DAS 36