User - ICP DAS USA iCAM-MR User Manual

identify IP cameras. To change the device name, enter a new name for the IP camera and
click Submit.

OSD Font: Enable to display the device name on the ActiveX OSD.

OSD Time: Enable to display camera time on the ActiveX OSD.

OSD Font Size: Adjust the size of the ActiveX OSD.

OSD Zoom Ratio: Enable to display camera zoom ratio on the OSD.

1920 x 1080 OSD Font Size: The streaming font size at 1920x1080 resolution

720 x 480 OSD Font Size: The streaming font size at 720x480 resolution

352 x 240 OSD Font Size: The streaming font size at 352x240 resolution

ActiveX OSD Display: Enable/disable to display/hide the device name.

ActiveX OSD Name: The name you enter here will be displayed on the ActiveX

Web Title Name: Enter the name to be displayed on the web browser.

Low Latency Mode: Enable to reduce latency of the ActiveX.
Note: ActiveX is for Windows OS only.

5-1-2 User

The IP camera supports up to 10 user accounts. Each account can be individually configured for its
access rights. To add/edit a user, click Add/Edit User. To access an IP camera without authentication,
switch the Bypass Logon option to On. Enable IPScan Bypass Logon to log in the camera through
IPScan without authentication. To add a user, press Add User, and you will see the following screen.
Enter the account name and password for the new account, and then check to assign the access
rights for this account.
To edit account information, click Edit User. To delete a user, click Remove User. Click Submit to
update the settings.
iCAM-MR/ZMR Series User Manual ICP DAS 28