Table of Contents
Advertisement
Restore to Factory Default
To restore the IP camera to the factory
default, follow the below procedures:
1. Remove the cover of IP Camera. Press and
hold the
RESET
more than 10 seconds until the Len LED
flashes once, then release the button.
2. The IP camera will restart.
3. Launch to IPScan Utility to search for the IP
camera.
4. Access the IP camera via an Internet
browser.
5. Enter the default username (admin) and
password (pass).
Default camera IP/user name/password:
IP: 192.168.0.200
Subnet Mask: 255.255.255.0
Gateway: 192.168.0.1
iCAM-MR/ZMR Series User Manual
button (as the figure) for
Username: admin
Password: pass
ICP DAS
53
Advertisement
Table of Contents
