The Setting Of Icam Ip Camera (Use Wise) - ICP DAS USA iCAM-MR User Manual

2-4 The Setting of iCAM IP Camera (Use WISE)

The iCAM IP Camera setting interface is shown as below (using iCAM-MR6422X as an example):
The settings are as below:
 Nickname: For user to define nickname for the IP Camera, the nickname will be displayed on the "IP
Camera Status" and "Rule Setting" pages.
 Description: The field provides a space for the user to make a brief description of this IP Camera.
 IP: Enter the IP address of the IP Camera for the connection.
 Port: Enter the Port number of the IP Camera for the connection.
 Authentication: Because IP Camera requires account and password validation, please enter the login
ID and Password of the IP Camera in the "Authentication" field. About content of the
"Authentication" field, WISE will pre-input the IP Camera's default login ID and Password, if user
has changed the login ID and Password, please also remember to change them in the page.
 Time Synchronization: if user click "Enable" to enable the Time Synchronization function. The
WISE will actively connect with IP Camera to synchronize the clock of IP Camera through network. If
user does not click "Enable", then IP Camera will synchronize its clock by its original setting.
 File Transfer: The Image files and Video files captured by IP Camera can be uploaded to remote FTP
server of the manage center via FTP protocol. User can directly select the pre-defined FTP server from
the FTP server list or click on "Add new FTP Server" to add a new FTP Server to set up parameters
for FTP Upload.
 Connection Testing: The user could test if the IP Camera setting is correct or not. After clicking
"Testing" button, the WISE will verify the connection status with the IP Camera and reply the result.
iCAM-MR/ZMR Series User Manual
Figure6: iCAM IP Camera Setting page
ICP DAS 16