Day Mode / Night Mode - ICP DAS USA iCAM-MR User Manual

6-2-2 Day Mode / Night Mode

The IP camera provides two sets of video quality database for day or night mode. This is very useful
settings for video quality especially for ANPR/LPR application where the shutter speed can be
customized at night. The video quality settings can be applied by Day and Night Switch explained later
in this chapter.
Video setting options are described as follows:

White Balance Control: sets white balance configurations for different scenarios
including tungsten, indoor, fluorescents, or outdoor environments, or choose Auto
for the camera to automatically switch between white balance settings

Mirror: flips the video horizontally

Flip: flips the video vertically

Exposure Value: adjusts the value of exposure; the higher the value is set, the
brighter the video is

WDR: enables or disables Wide Dynamic Range to capture greater details

Back-light Compensation: increases the exposure of objects with insufficient light

DC- Iris/P-Iris Mode: turn on to enable auto iris adjustment

Shutter Limit: set the min and max shutter values

Auto Gain Control (Sense Up+): see the below description

3D Noise Reduction: suppresses noise occurred in low lighting conditions

Sense Up: select the level of Sense Up to enhance the video

Color Mode: switch between color/black-and-white mode

IR LED: Turn on to activate the infrared LED

IR Cut Filter: enable/disable the IR cut filter
Without Sense Up
iCAM-MR/ZMR Series User Manual
Sense Up by 3 Frames
ICP DAS 38