Auto Focus; Day Night Mode Switch - ICP DAS USA iCAM-MR User Manual

6-2-5 Auto Focus

Here you are allowed to change the settings of autofocus functions for autofocus-supported
cameras.

Zoom Speed: Set the speed for Zoom In and Zoom Out

Focus Speed: Set the speed for Focus Near and Focus Far

Quick Zoom: Zoom to the ratio you specified

Quick Focus: Click to focus automatically

Lens Initialize: Click to reset zoom speed, focus speed, and zoom ratio to factory defaults
Note: Auto focus camera only

6-2-6 Day Night Mode Switch

The Day Night Mode Switch allows you to schedule IR activities by (1) auto, (2) day, (3) night, (4)
schedule, or (5) external control. When the setting is set to Auto, the IR module is turned on/off
automatically according to the signal from the light sensor. The Night setting removes the IR cut filter,
and the Day setting keeps the filter on. If you choose Schedule, the filter turns on/off according to the
set time period.
Day Night Mode Switch setting options are described as follows:

Auto: select the delay time for switching day/night mode

Day Mode: fix the camera to day mode

Night Mode: fix the camera to night mode and turn on the infrared function

Schedule: Set the switching time of day/night mode
Note: IR-cut camera model only.
iCAM-MR/ZMR Series User Manual ICP DAS 40